init

web/sites/default/default.settings.php

@@ -0,0 +1,779 @@
+<?php
+
+// @codingStandardsIgnoreFile
+
+/**
+ * @file
+ * Drupal site-specific configuration file.
+ *
+ * IMPORTANT NOTE:
+ * This file may have been set to read-only by the Drupal installation program.
+ * If you make changes to this file, be sure to protect it again after making
+ * your modifications. Failure to remove write permissions to this file is a
+ * security risk.
+ *
+ * In order to use the selection rules below the multisite aliasing file named
+ * sites/sites.php must be present. Its optional settings will be loaded, and
+ * the aliases in the array $sites will override the default directory rules
+ * below. See sites/example.sites.php for more information about aliases.
+ *
+ * The configuration directory will be discovered by stripping the website's
+ * hostname from left to right and pathname from right to left. The first
+ * configuration file found will be used and any others will be ignored. If no
+ * other configuration file is found then the default configuration file at
+ * 'sites/default' will be used.
+ *
+ * For example, for a fictitious site installed at
+ * https://www.drupal.org:8080/mysite/test/, the 'settings.php' file is searched
+ * for in the following directories:
+ *
+ * - sites/8080.www.drupal.org.mysite.test
+ * - sites/www.drupal.org.mysite.test
+ * - sites/drupal.org.mysite.test
+ * - sites/org.mysite.test
+ *
+ * - sites/8080.www.drupal.org.mysite
+ * - sites/www.drupal.org.mysite
+ * - sites/drupal.org.mysite
+ * - sites/org.mysite
+ *
+ * - sites/8080.www.drupal.org
+ * - sites/www.drupal.org
+ * - sites/drupal.org
+ * - sites/org
+ *
+ * - sites/default
+ *
+ * Note that if you are installing on a non-standard port number, prefix the
+ * hostname with that number. For example,
+ * https://www.drupal.org:8080/mysite/test/ could be loaded from
+ * sites/8080.www.drupal.org.mysite.test/.
+ *
+ * @see example.sites.php
+ * @see \Drupal\Core\DrupalKernel::getSitePath()
+ *
+ * In addition to customizing application settings through variables in
+ * settings.php, you can create a services.yml file in the same directory to
+ * register custom, site-specific service definitions and/or swap out default
+ * implementations with custom ones.
+ */
+
+/**
+ * Database settings:
+ *
+ * The $databases array specifies the database connection or
+ * connections that Drupal may use.  Drupal is able to connect
+ * to multiple databases, including multiple types of databases,
+ * during the same request.
+ *
+ * One example of the simplest connection array is shown below. To use the
+ * sample settings, copy and uncomment the code below between the @code and
+ * @endcode lines and paste it after the $databases declaration. You will need
+ * to replace the database username and password and possibly the host and port
+ * with the appropriate credentials for your database system.
+ *
+ * The next section describes how to customize the $databases array for more
+ * specific needs.
+ *
+ * @code
+ * $databases['default']['default'] = array (
+ *   'database' => 'databasename',
+ *   'username' => 'sqlusername',
+ *   'password' => 'sqlpassword',
+ *   'host' => 'localhost',
+ *   'port' => '3306',
+ *   'driver' => 'mysql',
+ *   'prefix' => '',
+ *   'collation' => 'utf8mb4_general_ci',
+ * );
+ * @endcode
+ */
+$databases = [];
+
+/**
+ * Customizing database settings.
+ *
+ * Many of the values of the $databases array can be customized for your
+ * particular database system. Refer to the sample in the section above as a
+ * starting point.
+ *
+ * The "driver" property indicates what Drupal database driver the
+ * connection should use.  This is usually the same as the name of the
+ * database type, such as mysql or sqlite, but not always.  The other
+ * properties will vary depending on the driver.  For SQLite, you must
+ * specify a database file name in a directory that is writable by the
+ * webserver.  For most other drivers, you must specify a
+ * username, password, host, and database name.
+ *
+ * Transaction support is enabled by default for all drivers that support it,
+ * including MySQL. To explicitly disable it, set the 'transactions' key to
+ * FALSE.
+ * Note that some configurations of MySQL, such as the MyISAM engine, don't
+ * support it and will proceed silently even if enabled. If you experience
+ * transaction related crashes with such configuration, set the 'transactions'
+ * key to FALSE.
+ *
+ * For each database, you may optionally specify multiple "target" databases.
+ * A target database allows Drupal to try to send certain queries to a
+ * different database if it can but fall back to the default connection if not.
+ * That is useful for primary/replica replication, as Drupal may try to connect
+ * to a replica server when appropriate and if one is not available will simply
+ * fall back to the single primary server (The terms primary/replica are
+ * traditionally referred to as master/slave in database server documentation).
+ *
+ * The general format for the $databases array is as follows:
+ * @code
+ * $databases['default']['default'] = $info_array;
+ * $databases['default']['replica'][] = $info_array;
+ * $databases['default']['replica'][] = $info_array;
+ * $databases['extra']['default'] = $info_array;
+ * @endcode
+ *
+ * In the above example, $info_array is an array of settings described above.
+ * The first line sets a "default" database that has one primary database
+ * (the second level default).  The second and third lines create an array
+ * of potential replica databases.  Drupal will select one at random for a given
+ * request as needed.  The fourth line creates a new database with a name of
+ * "extra".
+ *
+ * You can optionally set prefixes for some or all database table names
+ * by using the 'prefix' setting. If a prefix is specified, the table
+ * name will be prepended with its value. Be sure to use valid database
+ * characters only, usually alphanumeric and underscore. If no prefixes
+ * are desired, leave it as an empty string ''.
+ *
+ * To have all database names prefixed, set 'prefix' as a string:
+ * @code
+ *   'prefix' => 'main_',
+ * @endcode
+ *
+ * Per-table prefixes are deprecated as of Drupal 8.2, and will be removed in
+ * Drupal 9.0. After that, only a single prefix for all tables will be
+ * supported.
+ *
+ * To provide prefixes for specific tables, set 'prefix' as an array.
+ * The array's keys are the table names and the values are the prefixes.
+ * The 'default' element is mandatory and holds the prefix for any tables
+ * not specified elsewhere in the array. Example:
+ * @code
+ *   'prefix' => array(
+ *     'default'   => 'main_',
+ *     'users'     => 'shared_',
+ *     'sessions'  => 'shared_',
+ *     'role'      => 'shared_',
+ *     'authmap'   => 'shared_',
+ *   ),
+ * @endcode
+ * You can also use a reference to a schema/database as a prefix. This may be
+ * useful if your Drupal installation exists in a schema that is not the default
+ * or you want to access several databases from the same code base at the same
+ * time.
+ * Example:
+ * @code
+ *   'prefix' => array(
+ *     'default'   => 'main.',
+ *     'users'     => 'shared.',
+ *     'sessions'  => 'shared.',
+ *     'role'      => 'shared.',
+ *     'authmap'   => 'shared.',
+ *   );
+ * @endcode
+ * NOTE: MySQL and SQLite's definition of a schema is a database.
+ *
+ * Advanced users can add or override initial commands to execute when
+ * connecting to the database server, as well as PDO connection settings. For
+ * example, to enable MySQL SELECT queries to exceed the max_join_size system
+ * variable, and to reduce the database connection timeout to 5 seconds:
+ * @code
+ * $databases['default']['default'] = array(
+ *   'init_commands' => array(
+ *     'big_selects' => 'SET SQL_BIG_SELECTS=1',
+ *   ),
+ *   'pdo' => array(
+ *     PDO::ATTR_TIMEOUT => 5,
+ *   ),
+ * );
+ * @endcode
+ *
+ * WARNING: The above defaults are designed for database portability. Changing
+ * them may cause unexpected behavior, including potential data loss. See
+ * https://www.drupal.org/developing/api/database/configuration for more
+ * information on these defaults and the potential issues.
+ *
+ * More details can be found in the constructor methods for each driver:
+ * - \Drupal\Core\Database\Driver\mysql\Connection::__construct()
+ * - \Drupal\Core\Database\Driver\pgsql\Connection::__construct()
+ * - \Drupal\Core\Database\Driver\sqlite\Connection::__construct()
+ *
+ * Sample Database configuration format for PostgreSQL (pgsql):
+ * @code
+ *   $databases['default']['default'] = array(
+ *     'driver' => 'pgsql',
+ *     'database' => 'databasename',
+ *     'username' => 'sqlusername',
+ *     'password' => 'sqlpassword',
+ *     'host' => 'localhost',
+ *     'prefix' => '',
+ *   );
+ * @endcode
+ *
+ * Sample Database configuration format for SQLite (sqlite):
+ * @code
+ *   $databases['default']['default'] = array(
+ *     'driver' => 'sqlite',
+ *     'database' => '/path/to/databasefilename',
+ *   );
+ * @endcode
+ */
+
+/**
+ * Location of the site configuration files.
+ *
+ * The $config_directories array specifies the location of file system
+ * directories used for configuration data. On install, the "sync" directory is
+ * created. This is used for configuration imports. The "active" directory is
+ * not created by default since the default storage for active configuration is
+ * the database rather than the file system. (This can be changed. See "Active
+ * configuration settings" below).
+ *
+ * The default location for the "sync" directory is inside a randomly-named
+ * directory in the public files path. The setting below allows you to override
+ * the "sync" location.
+ *
+ * If you use files for the "active" configuration, you can tell the
+ * Configuration system where this directory is located by adding an entry with
+ * array key CONFIG_ACTIVE_DIRECTORY.
+ *
+ * Example:
+ * @code
+ *   $config_directories = array(
+ *     CONFIG_SYNC_DIRECTORY => '/directory/outside/webroot',
+ *   );
+ * @endcode
+ */
+$config_directories = [];
+
+/**
+ * Settings:
+ *
+ * $settings contains environment-specific configuration, such as the files
+ * directory and reverse proxy address, and temporary configuration, such as
+ * security overrides.
+ *
+ * @see \Drupal\Core\Site\Settings::get()
+ */
+
+/**
+ * Salt for one-time login links, cancel links, form tokens, etc.
+ *
+ * This variable will be set to a random value by the installer. All one-time
+ * login links will be invalidated if the value is changed. Note that if your
+ * site is deployed on a cluster of web servers, you must ensure that this
+ * variable has the same value on each server.
+ *
+ * For enhanced security, you may set this variable to the contents of a file
+ * outside your document root; you should also ensure that this file is not
+ * stored with backups of your database.
+ *
+ * Example:
+ * @code
+ *   $settings['hash_salt'] = file_get_contents('/home/example/salt.txt');
+ * @endcode
+ */
+$settings['hash_salt'] = '';
+
+/**
+ * Deployment identifier.
+ *
+ * Drupal's dependency injection container will be automatically invalidated and
+ * rebuilt when the Drupal core version changes. When updating contributed or
+ * custom code that changes the container, changing this identifier will also
+ * allow the container to be invalidated as soon as code is deployed.
+ */
+# $settings['deployment_identifier'] = \Drupal::VERSION;
+
+/**
+ * Access control for update.php script.
+ *
+ * If you are updating your Drupal installation using the update.php script but
+ * are not logged in using either an account with the "Administer software
+ * updates" permission or the site maintenance account (the account that was
+ * created during installation), you will need to modify the access check
+ * statement below. Change the FALSE to a TRUE to disable the access check.
+ * After finishing the upgrade, be sure to open this file again and change the
+ * TRUE back to a FALSE!
+ */
+$settings['update_free_access'] = FALSE;
+
+/**
+ * External access proxy settings:
+ *
+ * If your site must access the Internet via a web proxy then you can enter the
+ * proxy settings here. Set the full URL of the proxy, including the port, in
+ * variables:
+ * - $settings['http_client_config']['proxy']['http']: The proxy URL for HTTP
+ *   requests.
+ * - $settings['http_client_config']['proxy']['https']: The proxy URL for HTTPS
+ *   requests.
+ * You can pass in the user name and password for basic authentication in the
+ * URLs in these settings.
+ *
+ * You can also define an array of host names that can be accessed directly,
+ * bypassing the proxy, in $settings['http_client_config']['proxy']['no'].
+ */
+# $settings['http_client_config']['proxy']['http'] = 'http://proxy_user:proxy_pass@example.com:8080';
+# $settings['http_client_config']['proxy']['https'] = 'http://proxy_user:proxy_pass@example.com:8080';
+# $settings['http_client_config']['proxy']['no'] = ['127.0.0.1', 'localhost'];
+
+/**
+ * Reverse Proxy Configuration:
+ *
+ * Reverse proxy servers are often used to enhance the performance
+ * of heavily visited sites and may also provide other site caching,
+ * security, or encryption benefits. In an environment where Drupal
+ * is behind a reverse proxy, the real IP address of the client should
+ * be determined such that the correct client IP address is available
+ * to Drupal's logging, statistics, and access management systems. In
+ * the most simple scenario, the proxy server will add an
+ * X-Forwarded-For header to the request that contains the client IP
+ * address. However, HTTP headers are vulnerable to spoofing, where a
+ * malicious client could bypass restrictions by setting the
+ * X-Forwarded-For header directly. Therefore, Drupal's proxy
+ * configuration requires the IP addresses of all remote proxies to be
+ * specified in $settings['reverse_proxy_addresses'] to work correctly.
+ *
+ * Enable this setting to get Drupal to determine the client IP from the
+ * X-Forwarded-For header. If you are unsure about this setting, do not have a
+ * reverse proxy, or Drupal operates in a shared hosting environment, this
+ * setting should remain commented out.
+ *
+ * In order for this setting to be used you must specify every possible
+ * reverse proxy IP address in $settings['reverse_proxy_addresses'].
+ * If a complete list of reverse proxies is not available in your
+ * environment (for example, if you use a CDN) you may set the
+ * $_SERVER['REMOTE_ADDR'] variable directly in settings.php.
+ * Be aware, however, that it is likely that this would allow IP
+ * address spoofing unless more advanced precautions are taken.
+ */
+# $settings['reverse_proxy'] = TRUE;
+
+/**
+ * Specify every reverse proxy IP address in your environment.
+ * This setting is required if $settings['reverse_proxy'] is TRUE.
+ */
+# $settings['reverse_proxy_addresses'] = ['a.b.c.d', ...];
+
+/**
+ * Reverse proxy trusted headers.
+ *
+ * Sets which headers to trust from your reverse proxy.
+ *
+ * Common values are:
+ * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL
+ * - \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
+ *
+ * Note the default value of
+ * @code
+ * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
+ * @endcode
+ * is not secure by default. The value should be set to only the specific
+ * headers the reverse proxy uses. For example:
+ * @code
+ * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL
+ * @endcode
+ * This would trust the following headers:
+ * - X_FORWARDED_FOR
+ * - X_FORWARDED_HOST
+ * - X_FORWARDED_PROTO
+ * - X_FORWARDED_PORT
+ *
+ * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL
+ * @see \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
+ * @see \Symfony\Component\HttpFoundation\Request::setTrustedProxies
+ */
+# $settings['reverse_proxy_trusted_headers'] = \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED;
+
+
+/**
+ * Page caching:
+ *
+ * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page
+ * views. This tells a HTTP proxy that it may return a page from its local
+ * cache without contacting the web server, if the user sends the same Cookie
+ * header as the user who originally requested the cached page. Without "Vary:
+ * Cookie", authenticated users would also be served the anonymous page from
+ * the cache. If the site has mostly anonymous users except a few known
+ * editors/administrators, the Vary header can be omitted. This allows for
+ * better caching in HTTP proxies (including reverse proxies), i.e. even if
+ * clients send different cookies, they still get content served from the cache.
+ * However, authenticated users should access the site directly (i.e. not use an
+ * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid
+ * getting cached pages from the proxy.
+ */
+# $settings['omit_vary_cookie'] = TRUE;
+
+
+/**
+ * Cache TTL for client error (4xx) responses.
+ *
+ * Items cached per-URL tend to result in a large number of cache items, and
+ * this can be problematic on 404 pages which by their nature are unbounded. A
+ * fixed TTL can be set for these items, defaulting to one hour, so that cache
+ * backends which do not support LRU can purge older entries. To disable caching
+ * of client error responses set the value to 0. Currently applies only to
+ * page_cache module.
+ */
+# $settings['cache_ttl_4xx'] = 3600;
+
+/**
+ * Expiration of cached forms.
+ *
+ * Drupal's Form API stores details of forms in a cache and these entries are
+ * kept for at least 6 hours by default. Expired entries are cleared by cron.
+ *
+ * @see \Drupal\Core\Form\FormCache::setCache()
+ */
+# $settings['form_cache_expiration'] = 21600;
+
+/**
+ * Class Loader.
+ *
+ * If the APC extension is detected, the Symfony APC class loader is used for
+ * performance reasons. Detection can be prevented by setting
+ * class_loader_auto_detect to false, as in the example below.
+ */
+# $settings['class_loader_auto_detect'] = FALSE;
+
+/*
+ * If the APC extension is not detected, either because APC is missing or
+ * because auto-detection has been disabled, auto-loading falls back to
+ * Composer's ClassLoader, which is good for development as it does not break
+ * when code is moved in the file system. You can also decorate the base class
+ * loader with another cached solution than the Symfony APC class loader, as
+ * all production sites should have a cached class loader of some sort enabled.
+ *
+ * To do so, you may decorate and replace the local $class_loader variable. For
+ * example, to use Symfony's APC class loader without automatic detection,
+ * uncomment the code below.
+ */
+/*
+if ($settings['hash_salt']) {
+  $prefix = 'drupal.' . hash('sha256', 'drupal.' . $settings['hash_salt']);
+  $apc_loader = new \Symfony\Component\ClassLoader\ApcClassLoader($prefix, $class_loader);
+  unset($prefix);
+  $class_loader->unregister();
+  $apc_loader->register();
+  $class_loader = $apc_loader;
+}
+*/
+
+/**
+ * Authorized file system operations:
+ *
+ * The Update Manager module included with Drupal provides a mechanism for
+ * site administrators to securely install missing updates for the site
+ * directly through the web user interface. On securely-configured servers,
+ * the Update manager will require the administrator to provide SSH or FTP
+ * credentials before allowing the installation to proceed; this allows the
+ * site to update the new files as the user who owns all the Drupal files,
+ * instead of as the user the webserver is running as. On servers where the
+ * webserver user is itself the owner of the Drupal files, the administrator
+ * will not be prompted for SSH or FTP credentials (note that these server
+ * setups are common on shared hosting, but are inherently insecure).
+ *
+ * Some sites might wish to disable the above functionality, and only update
+ * the code directly via SSH or FTP themselves. This setting completely
+ * disables all functionality related to these authorized file operations.
+ *
+ * @see https://www.drupal.org/node/244924
+ *
+ * Remove the leading hash signs to disable.
+ */
+# $settings['allow_authorize_operations'] = FALSE;
+
+/**
+ * Default mode for directories and files written by Drupal.
+ *
+ * Value should be in PHP Octal Notation, with leading zero.
+ */
+# $settings['file_chmod_directory'] = 0775;
+# $settings['file_chmod_file'] = 0664;
+
+/**
+ * Public file base URL:
+ *
+ * An alternative base URL to be used for serving public files. This must
+ * include any leading directory path.
+ *
+ * A different value from the domain used by Drupal to be used for accessing
+ * public files. This can be used for a simple CDN integration, or to improve
+ * security by serving user-uploaded files from a different domain or subdomain
+ * pointing to the same server. Do not include a trailing slash.
+ */
+# $settings['file_public_base_url'] = 'http://downloads.example.com/files';
+
+/**
+ * Public file path:
+ *
+ * A local file system path where public files will be stored. This directory
+ * must exist and be writable by Drupal. This directory must be relative to
+ * the Drupal installation directory and be accessible over the web.
+ */
+# $settings['file_public_path'] = 'sites/default/files';
+
+/**
+ * Private file path:
+ *
+ * A local file system path where private files will be stored. This directory
+ * must be absolute, outside of the Drupal installation directory and not
+ * accessible over the web.
+ *
+ * Note: Caches need to be cleared when this value is changed to make the
+ * private:// stream wrapper available to the system.
+ *
+ * See https://www.drupal.org/documentation/modules/file for more information
+ * about securing private files.
+ */
+# $settings['file_private_path'] = '';
+
+/**
+ * Session write interval:
+ *
+ * Set the minimum interval between each session write to database.
+ * For performance reasons it defaults to 180.
+ */
+# $settings['session_write_interval'] = 180;
+
+/**
+ * String overrides:
+ *
+ * To override specific strings on your site with or without enabling the Locale
+ * module, add an entry to this list. This functionality allows you to change
+ * a small number of your site's default English language interface strings.
+ *
+ * Remove the leading hash signs to enable.
+ *
+ * The "en" part of the variable name, is dynamic and can be any langcode of
+ * any added language. (eg locale_custom_strings_de for german).
+ */
+# $settings['locale_custom_strings_en'][''] = [
+#   'forum'      => 'Discussion board',
+#   '@count min' => '@count minutes',
+# ];
+
+/**
+ * A custom theme for the offline page:
+ *
+ * This applies when the site is explicitly set to maintenance mode through the
+ * administration page or when the database is inactive due to an error.
+ * The template file should also be copied into the theme. It is located inside
+ * 'core/modules/system/templates/maintenance-page.html.twig'.
+ *
+ * Note: This setting does not apply to installation and update pages.
+ */
+# $settings['maintenance_theme'] = 'bartik';
+
+/**
+ * PHP settings:
+ *
+ * To see what PHP settings are possible, including whether they can be set at
+ * runtime (by using ini_set()), read the PHP documentation:
+ * http://php.net/manual/ini.list.php
+ * See \Drupal\Core\DrupalKernel::bootEnvironment() for required runtime
+ * settings and the .htaccess file for non-runtime settings.
+ * Settings defined there should not be duplicated here so as to avoid conflict
+ * issues.
+ */
+
+/**
+ * If you encounter a situation where users post a large amount of text, and
+ * the result is stripped out upon viewing but can still be edited, Drupal's
+ * output filter may not have sufficient memory to process it.  If you
+ * experience this issue, you may wish to uncomment the following two lines
+ * and increase the limits of these variables.  For more information, see
+ * http://php.net/manual/pcre.configuration.php.
+ */
+# ini_set('pcre.backtrack_limit', 200000);
+# ini_set('pcre.recursion_limit', 200000);
+
+/**
+ * Active configuration settings.
+ *
+ * By default, the active configuration is stored in the database in the
+ * {config} table. To use a different storage mechanism for the active
+ * configuration, do the following prior to installing:
+ * - Create an "active" directory and declare its path in $config_directories
+ *   as explained under the 'Location of the site configuration files' section
+ *   above in this file. To enhance security, you can declare a path that is
+ *   outside your document root.
+ * - Override the 'bootstrap_config_storage' setting here. It must be set to a
+ *   callable that returns an object that implements
+ *   \Drupal\Core\Config\StorageInterface.
+ * - Override the service definition 'config.storage.active'. Put this
+ *   override in a services.yml file in the same directory as settings.php
+ *   (definitions in this file will override service definition defaults).
+ */
+# $settings['bootstrap_config_storage'] = ['Drupal\Core\Config\BootstrapConfigStorageFactory', 'getFileStorage'];
+
+/**
+ * Configuration overrides.
+ *
+ * To globally override specific configuration values for this site,
+ * set them here. You usually don't need to use this feature. This is
+ * useful in a configuration file for a vhost or directory, rather than
+ * the default settings.php.
+ *
+ * Note that any values you provide in these variable overrides will not be
+ * viewable from the Drupal administration interface. The administration
+ * interface displays the values stored in configuration so that you can stage
+ * changes to other environments that don't have the overrides.
+ *
+ * There are particular configuration values that are risky to override. For
+ * example, overriding the list of installed modules in 'core.extension' is not
+ * supported as module install or uninstall has not occurred. Other examples
+ * include field storage configuration, because it has effects on database
+ * structure, and 'core.menu.static_menu_link_overrides' since this is cached in
+ * a way that is not config override aware. Also, note that changing
+ * configuration values in settings.php will not fire any of the configuration
+ * change events.
+ */
+# $config['system.file']['path']['temporary'] = '/tmp';
+# $config['system.site']['name'] = 'My Drupal site';
+# $config['system.theme']['default'] = 'stark';
+# $config['user.settings']['anonymous'] = 'Visitor';
+
+/**
+ * Fast 404 pages:
+ *
+ * Drupal can generate fully themed 404 pages. However, some of these responses
+ * are for images or other resource files that are not displayed to the user.
+ * This can waste bandwidth, and also generate server load.
+ *
+ * The options below return a simple, fast 404 page for URLs matching a
+ * specific pattern:
+ * - $config['system.performance']['fast_404']['exclude_paths']: A regular
+ *   expression to match paths to exclude, such as images generated by image
+ *   styles, or dynamically-resized images. The default pattern provided below
+ *   also excludes the private file system. If you need to add more paths, you
+ *   can add '|path' to the expression.
+ * - $config['system.performance']['fast_404']['paths']: A regular expression to
+ *   match paths that should return a simple 404 page, rather than the fully
+ *   themed 404 page. If you don't have any aliases ending in htm or html you
+ *   can add '|s?html?' to the expression.
+ * - $config['system.performance']['fast_404']['html']: The html to return for
+ *   simple 404 pages.
+ *
+ * Remove the leading hash signs if you would like to alter this functionality.
+ */
+# $config['system.performance']['fast_404']['exclude_paths'] = '/\/(?:styles)|(?:system\/files)\//';
+# $config['system.performance']['fast_404']['paths'] = '/\.(?:txt|png|gif|jpe?g|css|js|ico|swf|flv|cgi|bat|pl|dll|exe|asp)$/i';
+# $config['system.performance']['fast_404']['html'] = '<!DOCTYPE html><html><head><title>404 Not Found</title></head><body><h1>Not Found</h1><p>The requested URL "@path" was not found on this server.</p></body></html>';
+
+/**
+ * Load services definition file.
+ */
+$settings['container_yamls'][] = $app_root . '/' . $site_path . '/services.yml';
+
+/**
+ * Override the default service container class.
+ *
+ * This is useful for example to trace the service container for performance
+ * tracking purposes, for testing a service container with an error condition or
+ * to test a service container that throws an exception.
+ */
+# $settings['container_base_class'] = '\Drupal\Core\DependencyInjection\Container';
+
+/**
+ * Override the default yaml parser class.
+ *
+ * Provide a fully qualified class name here if you would like to provide an
+ * alternate implementation YAML parser. The class must implement the
+ * \Drupal\Component\Serialization\SerializationInterface interface.
+ */
+# $settings['yaml_parser_class'] = NULL;
+
+/**
+ * Trusted host configuration.
+ *
+ * Drupal core can use the Symfony trusted host mechanism to prevent HTTP Host
+ * header spoofing.
+ *
+ * To enable the trusted host mechanism, you enable your allowable hosts
+ * in $settings['trusted_host_patterns']. This should be an array of regular
+ * expression patterns, without delimiters, representing the hosts you would
+ * like to allow.
+ *
+ * For example:
+ * @code
+ * $settings['trusted_host_patterns'] = array(
+ *   '^www\.example\.com$',
+ * );
+ * @endcode
+ * will allow the site to only run from www.example.com.
+ *
+ * If you are running multisite, or if you are running your site from
+ * different domain names (eg, you don't redirect http://www.example.com to
+ * http://example.com), you should specify all of the host patterns that are
+ * allowed by your site.
+ *
+ * For example:
+ * @code
+ * $settings['trusted_host_patterns'] = array(
+ *   '^example\.com$',
+ *   '^.+\.example\.com$',
+ *   '^example\.org$',
+ *   '^.+\.example\.org$',
+ * );
+ * @endcode
+ * will allow the site to run off of all variants of example.com and
+ * example.org, with all subdomains included.
+ */
+
+/**
+ * The default list of directories that will be ignored by Drupal's file API.
+ *
+ * By default ignore node_modules and bower_components folders to avoid issues
+ * with common frontend tools and recursive scanning of directories looking for
+ * extensions.
+ *
+ * @see file_scan_directory()
+ * @see \Drupal\Core\Extension\ExtensionDiscovery::scanDirectory()
+ */
+$settings['file_scan_ignore_directories'] = [
+  'node_modules',
+  'bower_components',
+];
+
+/**
+ * The default number of entities to update in a batch process.
+ *
+ * This is used by update and post-update functions that need to go through and
+ * change all the entities on a site, so it is useful to increase this number
+ * if your hosting configuration (i.e. RAM allocation, CPU speed) allows for a
+ * larger number of entities to be processed in a single batch run.
+ */
+$settings['entity_update_batch_size'] = 50;
+
+/**
+ * Entity update backup.
+ *
+ * This is used to inform the entity storage handler that the backup tables as
+ * well as the original entity type and field storage definitions should be
+ * retained after a successful entity update process.
+ */
+$settings['entity_update_backup'] = TRUE;
+
+/**
+ * Load local development override configuration, if available.
+ *
+ * Use settings.local.php to override variables on secondary (staging,
+ * development, etc) installations of this site. Typically used to disable
+ * caching, JavaScript/CSS compression, re-routing of outgoing emails, and
+ * other things that should not happen on development and testing sites.
+ *
+ * Keep this code block at the end of this file to take full effect.
+ */
+#
+# if (file_exists($app_root . '/' . $site_path . '/settings.local.php')) {
+#   include $app_root . '/' . $site_path . '/settings.local.php';
+# }